Display Case Temperature and Humidity Chamber (18℃~30℃, 40%~70%RH@20℃)
Application Scenarios
- Enquiry-based quotation
- Technical & calibration support
- Worldwide enquiries welcome
Description
Product Introduction
Application Scenarios
Cultural Relics Protection: This device is often used in glass display cases in museums and art galleries. It is suitable for exhibits such as paintings, calligraphy, ceramics, and metal objects that are susceptible to temperature and humidity.
Laboratory and Industrial Applications: Used in areas requiring strict environmental control, such as precision instrument maintenance and electronic component storage.
Product Feature
- Product Advantages
- Condensate recovery system reduces water refill frequency.
- Imported core components provide enhanced stability, and touchscreen operation makes operation more convenient.
- Quiet operation: Less than 50 dB noise level.
- Automatic control: The device automatically shuts down when the temperature and humidity reach the set values. It automatically restarts when the ambient temperature and humidity exceed or fall below the set values, reducing energy consumption.
- Constant temperature and humidity controllers are core equipment for museum artifact preservation. Their precise control, energy-saving, and intelligent features significantly enhance preservation effectiveness.
- Multiple intelligent protection
- Compressor high-voltage protection,
- compressor thermal protection
- current overload protection
- power-off memory protection
- Intelligent Connection
- Reserved Modbus 232 communication port
- Optional mobile app remote control
Technical Indicators
M
odel
Product Name
Display Cabinet Constant Temperature and Humidity Monitor
Rated Voltage
220V/50Hz
Temperature Control Range
18℃~30℃
Humidity Control Range
40%~70%RH@20℃
Temperature Fluctuation
Within ±0.2°C
Temperature Deviation
±0.1℃ (no-load, constant temperature)
Humidity Fluctuation
Within ±1% RH
Humidity Deviation
Within ±1% RH
Product Features
Cooling Capacity
700W
Dehumidification Capacity
12L/D
Controlled Space
4.5m³(affected by sealing)
Heating Capacity
130W
Humidification Capacity
24L/D
Maximum Power
500W
Circulating Air Volume
60m³/h
Noise
50dB(A)
Fan Type
High-efficiency centrifugal fan
Motor Type
Fully enclosed copper motor
Inlet/Outlet Method
Manual operation
Refrigerant/Coolant
R134a
Heating
PTC ceramic heater
Water Tank Capacity
8.2L
Dimensions (L x W x H)
670mm×470mm×350mm
Installation Parameters
Cabinet supply/return air duct diameter: 60mm
Circular cooling vent: 150*150mm
Duct material: Double-layer aluminum foil insulation
Communication Method
WiFi / 232 (cannot be used simultaneously)
Weight
35KG
Product Configuration
Compressor brand
Imported Panasonic compressor (fully enclosed rotor compressor)
Temperature and humidity sensors
imported Swiss Rotronic temperature and humidity sensors
Thermostat/humidity controller
imported Japanese Shimadori temperature and humidity controllers
Filters
B
rand-name condenser and evaporator filters
Water tank
R
ust-resistant stainless steel
Factory Temperature and Humidity Settings
20℃±2℃,
50%RH±5%RH
Specifications
| M odel | ||
|---|---|---|
| Product Name | Display Cabinet Constant Temperature and Humidity Monitor | |
| Rated Voltage | 220V/50Hz | |
| Temperature Control Range | 18℃~30℃ | |
| Humidity Control Range | 40%~70%RH@20℃ | |
| Temperature Fluctuation | Within ±0.2°C | |
| Temperature Deviation | ±0.1℃ (no-load, constant temperature) | |
| Humidity Fluctuation | Within ±1% RH | |
| Humidity Deviation | Within ±1% RH | |
| Product Features | Cooling Capacity | 700W |
| Dehumidification Capacity | 12L/D | |
| Controlled Space | 4.5m³(affected by sealing) | |
| Heating Capacity | 130W | |
| Humidification Capacity | 24L/D | |
| Maximum Power | 500W | |
| Circulating Air Volume | 60m³/h | |
| Noise | 50dB(A) | |
| Fan Type | High-efficiency centrifugal fan | |
| Motor Type | Fully enclosed copper motor | |
| Inlet/Outlet Method | Manual operation | |
| Refrigerant/Coolant | R134a | |
| Heating | PTC ceramic heater | |
| Water Tank Capacity | 8.2L | |
| Dimensions (L x W x H) | 670mm×470mm×350mm | |
| Installation Parameters | Cabinet supply/return air duct diameter: 60mm Circular cooling vent: 150*150mm Duct material: Double-layer aluminum foil insulation | |
| Communication Method | WiFi / 232 (cannot be used simultaneously) | |
| Weight | 35KG | |
| Product Configuration | Compressor brand | Imported Panasonic compressor (fully enclosed rotor compressor) |
| Temperature and humidity sensors | imported Swiss Rotronic temperature and humidity sensors | |
| Thermostat/humidity controller | imported Japanese Shimadori temperature and humidity controllers | |
| Filters | B rand-name condenser and evaporator filters | |
| Water tank | R ust-resistant stainless steel | |
| Factory Temperature and Humidity Settings | 20℃±2℃, 50%RH±5%RH |
Related products
Temperature and Humidity Test Chamber(Standard big chamber 5℃-50℃/10%RH-95%RH)
The temperature and humidity calibration chamber is specially developed by our company for calibrating temperature and humidity meters.…
View product →
Portable Temperature and Humidity Calibration Chamber
portable temperature and humidity calibration chamber is specially developed by our company for calibrating temperature and humidity meters.…
View product →
Temperature and Humidity Test Chamber(thermometer and hygrometer calibration chamber -20℃~70℃,10%RH-90%RH)
The temperature and humidity calibration box is specially developed by our company for calibrating temperature and humidity meters.…
View product →
Temperature and Humidity Test Chamber(Standard Small chamber 5℃-50℃/10%RH-95%RH)
The temperature and humidity test box(temperature and humidity calibration chamber) is specially developed by our company for the…
View product →